Как мы работаем
По сертификату
"военный регистр"
"военный регистр"
Только с Юр. Лицами,
мелкий и крупный опт
мелкий и крупный опт
Цена по запросу
DRV8410RTER, Motor / Motion / Ignition Controllers & Drivers 1.65-V to 11-V, 2.5-A, dual H-bridge motor driver with current regulation 16-WQ
Power\Power Management ICs\Motor / Motion / Ignition Controllers & DriversDRV8410 Dual H-Bridge Motor Driver Texas Instruments DRV8410 Dual H-Bridge Motor Driver manages one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The triple charge pump enables the DRV8410 to operate down to 1.65V, accommodating 1.8V supply rails and low-battery conditions. The charge pump integrates all capacitors and supplies a 100% duty cycle operation. Meanwhile, the inputs and outputs can be paralleled to drive high-current brush DC motors with half the RDS(ON). The device implements current regulation by comparing an internal reference voltage to the voltage on the xISEN pins, which is proportional to the motor current through an external sense resistor. Limiting the current can significantly diminish large currents during motor startup and stall conditions.
| Brand | Texas Instruments |
| Development Kit | DRV8410EVM |
| Factory Pack Quantity | 5000 |
| Manufacturer | Texas Instruments |
| Maximum Operating Temperature | +125 C |
| Minimum Operating Temperature | -40 C |
| Mounting Style | SMD/SMT |
| Operating Frequency | 100 kHz |
| Operating Supply Voltage | 1.65 V to 11 V |
| Output Current | 2.5 A |
| Output Voltage | 5.75 V |
| Package/Case | WQFN-16 |
| Product Category | Motor/Motion/Ignition Controllers & Drivers |
| Product Type | Motor/Motion/Ignition Controllers & Drivers |
| Product | Stepper Motor Controllers/Drivers |
| Subcategory | PMIC-Power Management ICs |
| Type | Dual Half Bridge Motor Driver |
Похожие товары
Цена по запросу
Цена по запросу
Цена по запросу
Цена по запросу
Цена по запросу
