Как мы работаем

По сертификату
"военный регистр"

Только с Юр. Лицами,
мелкий и крупный опт

Цена по запросу

DRV5012AEDMRR, Board Mount Hall Effect / Magnetic Sensors UltraLowPowerDigital LatchHall EffectSen

Sensors\Magnetic Sensors\Board Mount Hall Effect / Magnetic SensorsDRV5012 Digital-Latch Hall Effect Sensors Texas Instruments DRV5012 Ultra-Low Power Digital-Latch Hall Effect Sensors have a pin-selectable sampling rate. When a south magnetic pole is near the top of the package, and the BOP threshold is exceeded, the device drives a low voltage. The output stays low until a north pole is applied and the BRP threshold is crossed, which causes the output to drive a high voltage. Alternating north and south poles are required to toggle the output, and integrated hysteresis separates BOP and BRP to provide robust switching. Using an internal oscillator, the DRV5012 device samples the magnetic field and updates the output at 20Hz or 2.5kHz, depending on the SEL pin. This dual-bandwidth feature allows systems to monitor movement changes while using minimal power.

Brand	Texas Instruments
Factory Pack Quantity: Factory Pack Quantity	3000
Manufacturer	Texas Instruments
Maximum Operating Temperature	+85 C
Maximum Output Current	5 mA
Minimum Operating Temperature	-40 C
Mounting Style	SMD/SMT
Operating Point Min/Max	0.6 mT to 3.3 mT
Operating Supply Current	160 uA
Operating Supply Voltage	1.65 V to 5.5 V
Output Type	Push-Pull
Output Voltage	5.5 V
Package / Case	X2SON-4
Product Category	Board Mount Hall Effect/Magnetic Sensors
Product Type	Hall Effect/Magnetic Sensors
Product	Hall Effect Latches
Release Point Min/Max (Brp)	-3.3 mT to-0.6 mT
Sensitivity	2 mT
Series	DRV5012
Subcategory	Sensors
Supply Voltage - Max	5.5 V
Supply Voltage - Min	1.65 V
Termination Style	SMD/SMT
Type	Digital Hall Effect Sensor
Вес, г	0.0016