Как мы работаем

По сертификату
"военный регистр"

Только с Юр. Лицами,
мелкий и крупный опт

Цена по запросу

ISO1042QDWRQ1, SOIC-16-300mIl CAN ICs

ISO1042 & ISO1042-Q1 Isolated CAN Transceivers Texas Instruments ISO1042 & ISO1042-Q1 Isolated CAN Transceivers are galvanically-isolated controller area network (CAN) transceivers that meet the specifications of the ISO11898-2 (2016) standard. The ISO1042/Q1 device offers ±70VDC bus fault protection and ±30V common-mode voltage range. The device supports up to 5Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to a classic CAN. The ISO1042/Q1uses a silicon dioxide (SiO 2 ) insulation barrier with a withstand voltage of 5000V RMS and a working voltage of 1060V RMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage and prevents noise currents from the bus from entering the local ground. The ISO1042/Q1 is available for both basic and reinforced isolation.

Brand	Texas Instruments
Data Rate	5 Mb/s
ESD Protection	16 kV
Factory Pack Quantity: Factory Pack Quantity	2000
Interface Type	CAN
Isolation Type	Galvanic
Manufacturer	Texas Instruments
Maximum Operating Temperature	+125 C
Minimum Operating Temperature	-40 C
Moisture Sensitive	Yes
Mounting Style	SMD/SMT
Number of Drivers	1 Driver
Number of Receivers	1 Receiver
Operating Supply Current	43 mA
Operating Supply Voltage	1.71 V to 5.5 V
Package / Case	SOIC-16
Pd - Power Dissipation	385 mW
Product Category	CAN Interface IC
Product Type	CAN Interface IC
Product	CAN Transceivers
Propagation Delay Time	76 ns
Qualification	AEC-Q100
Series	ISO1042-Q1
Subcategory	Interface ICs
Supply Voltage - Max	5.5 V
Supply Voltage - Min	1.71 V
Type	High Speed CAN Transceiver
Вес, г	0.75