Как мы работаем

По сертификату
"военный регистр"

Только с Юр. Лицами,
мелкий и крупный опт

Цена по запросу

ISO1044BDR, SOIC-8 CAN ICs

Interface\CAN TransceiversISO1044B Isolated CAN FD Transceiver Texas Instruments ISO1044B Isolated CAN FD Transceiver is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1044B device offers ±58V DC bus fault protection and ±12V common-mode voltage range. The device supports up to 5Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO 2 ) insulation barrier with a withstand voltage of 3000V RMS and a working voltage of 450V RMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. When used in conjunction with isolated power supplies, the device protects against high voltage and prevents noise currents from the bus from entering the local ground. The Texas Instruments ISO1044B supports a wide ambient temperature range of -40°C to +125°C. The device is available in the small SOIC-8 (D) package, which significantly reduces the solution size compared to a traditional approach using optocouplers to isolate the CAN transceiver.

Data Rate	5Mbps
Supply Voltage	1.71V~1.89V;2.25V~5.5V;4.5V~5.5V
Type	Transceiver
Brand	Texas Instruments
Data Rate	5 Mb/s
Development Kit	ISO1044DEVM
ESD Protection	10 kV
Factory Pack Quantity: Factory Pack Quantity	2500
Interface Type	CAN
Isolation Type	Galvanic
Manufacturer	Texas Instruments
Maximum Operating Temperature	+125 C
Minimum Operating Temperature	-40 C
Moisture Sensitive	Yes
Mounting Style	SMD/SMT
Number of Drivers	1 Driver
Number of Receivers	1 Receiver
Operating Supply Current	52 mA
Operating Supply Voltage	1.71 V to 5.5 V, 4.5 V to 5.5 V
Package / Case	SOIC-8
Pd - Power Dissipation	146 mW
Product Category	CAN Interface IC
Product Type	CAN Interface IC
Product	CAN Transceivers
Propagation Delay Time	85 ns
Protocol Supported	CAN
Series	ISO1044
Subcategory	Interface ICs
Supply Voltage - Max	5.5 V
Supply Voltage - Min	1.71 V
Type	High Speed CAN FD Transceiver
Вес, г	0.18