Как мы работаем
По сертификату
"военный регистр"
"военный регистр"
Только с Юр. Лицами,
мелкий и крупный опт
мелкий и крупный опт

Цена по запросу
LAN9221-ABZJ, Ethernet Controller, Ethernet Controller, IEEE 802.3, IEEE 802.3u, 3 V, 3.6 V, QFN, 56 Pins
Semiconductors - ICs\Network Controllers\Ethernet Controllers
The LAN9221-ABZJ is a high-performance 16-bit Non-PCI 10/100 Ethernet Controller with variable voltage I/O. It has been specifically designed to provide high performance and throughput for 16-bit applications. It is fully IEEE 802.3 10Base-T and 802.3u 100Base-TX compliant and supports HP Auto-MDIX. The variable voltage I/O signals of the LAN9221 accommodate lower voltage I/O signalling without the need for voltage level shifters. It includes an integrated Ethernet MAC and PHY. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit microprocessors and microcontrollers as well as 32-bit microprocessors with a 16-bit external bus. The integrated checksum offload engines enable the automatic generation of the 16-bit checksum for received and transmitted Ethernet frames, offloading the task from the CPU.
• Efficient architecture with low CPU overhead
• Easily interfaces to most 16-bit embedded CPU’s
• Integrated PHY with HP Auto-MDIX support
• Integrated checksum offload engine helps reduce CPU load
• Low pin count and small body size package for small form factor system designs
• Burst-mode read support
• Internal buffer memory can store over 200 packets
• Automatic PAUSE and back-pressure flow control
• Interrupt pin with programmable hold-off timer
• Reduces system cost and increases design flexibility
• SRAM-like interface easily interfaces to most embedded CPU’s or SoC’s
• Fully compliant with IEEE 802.3/802.3u standards
• Integrated Ethernet MAC and PHY
• Full- and half-duplex support
• Full-duplex flow control
• Backpressure for half-duplex flow control
• Preamble generation and removal
• Automatic 32-bit CRC generation and checking
• Automatic payload padding and pad removal
• Loop-back modes
Device Type | Ethernet Controller |
IC Case / Package | QFN |
IC Mounting | Surface Mount |
MSL | MSL 3-168 hours |
No. of Pins | 56Pins |
Operating Temperature Max | 70°C |
Operating Temperature Min | 0°C |
Supply Voltage Max | 3.6V |
Supply Voltage Min | 3V |
Supported Standards | IEEE 802.3, IEEE 802.3u |
Automotive | No |
Auto-Negotiation | Yes |
Communication Mode | Full Duplex|Half Duplex |
DMA Support | Yes |
ECCN (US) | 5A991 |
Ethernet Interface Type | MII |
Ethernet Speed (Mbps) | 10|100 |
EU RoHS | Compliant |
Lead Shape | No Lead |
Loopback Mode | Internal |
Maximum Operating Supply Voltage (V) | 3.6 |
Maximum Operating Temperature (°C) | 70 |
Minimum Operating Supply Voltage (V) | 1.62 |
Minimum Operating Temperature (°C) | 0 |
Mounting | Surface Mount |
Packaging | Tray |
Part Status | Active |
PCB changed | 56 |
Physical Network Type | 10BASE-T|100BASE-TX |
Pin Count | 56 |
PPAP | No |
Product Category | Single Chip |
Standard Package Name | QFN |
Standard Supported | IEEE 802.3|IEEE 802.3u |
Supplier Package | VQFN EP |
Supplier Temperature Grade | Commercial |
Typical Operating Supply Voltage (V) | 1.8|2.5|3.3 |
Current - Supply | 85mA |
DigiKey Programmable | Not Verified |
Function | Controller |
Interface | Parallel |
Operating Temperature | 0°C ~ 70°C |
Package / Case | 56-VFQFN Exposed Pad |
Protocol | Ethernet |
Standards | 10/100 Base-T/TX PHY |
Supplier Device Package | 56-QFN(8x8) |
Voltage - Supply | 3.3V |
Вес, г | 1.79 |