Как мы работаем

По сертификату
"военный регистр"

Только с Юр. Лицами,
мелкий и крупный опт

Цена по запросу

LMH9135IRRLR, RF Amplifier 3.2 to 4.2 GHz differential to single-ended amplifier with integrated balun 12-WQFN -40 to 105

RF & Wireless\RF Integrated Circuits\RF AmplifierLMH9135 Differential to Single-Ended Amplifier Texas Instruments LMH9135 Differential to Single-Ended Amplifier are high-performance, single-channel radio frequency (RF) gain block amplifiers that support 3.2 - 4.2GHz frequency band. The device can support the requirements for next-generation 5G active antenna systems (AAS) or small-cell applications while driving the input of a power amplifier (PA). The RF amplifier provides 18dB typical gain with good linearity performance of +31.5dBm Output IP3 while maintaining less than 4dB noise figure across the whole 1dB bandwidth. The Texas Instruments LMH9135 is internally matched for 100Ω differential input impedance providing an easy interface with an RF-sampling or Zero-IF analog front-end (AFE) at the input. Also, the device is internally matched for 50Ω single-ended output impedance that is required to easily interface with a post-amplifier, surface acoustic wave (SAW) filter, or power amplifier (PA).

Brand	Texas Instruments
Factory Pack Quantity: Factory Pack Quantity	3000
Gain	18 dB
Input Return Loss	-10 dB
Manufacturer	Texas Instruments
Maximum Operating Temperature	+105 C
Minimum Operating Temperature	-40 C
Moisture Sensitive	Yes
Mounting Style	SMD/SMT
NF - Noise Figure	3.8 dB
Number of Channels	1 Channel
OIP3 - Third Order Intercept	31.5 dBm
Operating Frequency	3.2 GHz to 4.2 GHz
Operating Supply Current	120 mA
Operating Supply Voltage	3.3 V
P1dB - Compression Point	18 dBm
Package / Case	WQFN-12
Packaging	Reel, Cut Tape
Pd - Power Dissipation	395 mW
Product Category	RF Amplifier
Product Type	RF Amplifier
Series	LMH9135
Subcategory	Wireless & RF Integrated Circuits
Technology	Si
Test Frequency	3.5 GHz
Type	General Purpose Amplifiers