Как мы работаем

По сертификату
"военный регистр"

Только с Юр. Лицами,
мелкий и крупный опт

Цена по запросу

PVN012S-TPBF, Solid State Relays - PCB Mount 20V 1 Form A Photo Voltaic Relay

Electromechanical\Relays, Contactors & Solenoids\Solid State Relays - SSR\Solid State Relays - PCB Mount The PVN012S-TPBF is a HEXFET® surface-mount power MOSFET Photovoltaic Relay with bounce-free operation. It features the lowest possible on-state resistance - lower than a comparable reed relay. It is a single-pole, normally open solid state relay. It utilizes a GenerationV HEXFET output switch, driven by an integrated circuit photovoltaic generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. It exceeds the performance capabilities of electromechanical relays in life, sensitivity, stable on-resistance, miniaturization, magnetic insensitivity and ruggedness. It is ideally suited for switching high currents or low level signals without distortion or injection of electrical noise. • GenV HEXFET output • Linear AC/DC operation • Solid-state reliability • 4000Vrms I/O isolation

Brand	Infineon Technologies
Contact Form	SPST(1 Form A)
Control Voltage Range	1.2 VDC
Factory Pack Quantity: Factory Pack Quantity	750
Input Current	25 mA
Load Current Rating	2.5 A
Load Voltage Rating	20 VAC, 20 VDC
Manufacturer	Infineon
Maximum Operating Temperature	+85 C
Minimum Operating Temperature	-40 C
Moisture Sensitive	Yes
Mounting Style	PCB Mount
Output Type	MOSFET
Package / Case	DIP-6
Part # Aliases	PVN012S-TPBF SP001547262
Product Category	Solid State Relays-PCB Mount
Product Type	SSR-Solid State Relays
Product	Solid State Relays
Relay Contact Form	1 Form A(SPST-NO)
Subcategory	Relays
Termination Style	Solder Pin
Клеммы Реле	Gull Wing
Конфигурация Контакта	SPST-NO
Линейка Продукции	HEXFET PVN012
Макс. Сопротивление Включенного Состояния	0.1Ом
Максимальное Напряжение Нагрузки	20В
Монтаж Реле	SMD(Поверхностный Монтаж)
Напряжение Изоляции	4кВ
Прямой Ток	25мА
Стиль корпуса МОП-транзисторного реле	DIP-6
Тип нагрузки	AC/DC
Типовая емкость I/O	1пФ
Ток Нагрузки	2.5А
Форма контакта	SPST-NO(1 Form A)
Contact Configuration	SPST
Maximum Load Current	4.5 A
Maximum Load Voltage	20 V
Minimum Load Current	2.5 A
Minimum Load Voltage	0 V
Mounting Type	PCB Mount
Output Device	MOSFET
Series	PVN012
Вес, г	1.093