Как мы работаем
По сертификату
"военный регистр"
"военный регистр"
Только с Юр. Лицами,
мелкий и крупный опт
мелкий и крупный опт
Цена по запросу
RCLAMP0504P.TCT, ESD Protection Diodes / TVS Diodes RAILCLAMP 4-LINE 5V QFN
Unclassified
The RailClamp series ultra-low capacitance TVS Array designed to protect high speed data interfaces. It is specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events) and EFT (electrical fast transients). The device has a typical capacitance of only 0.50pF (pin 1 to 2), used on circuits operating in excess of 3GHz without signal attenuation. It is used to meet the ESD immunity requirements of IEC 61000-4-2, level 4 (±15kV air, ±8kV contact discharge). Each device can be configured to protect 1 bidirectional line or two unidirectional lines. It is designed for use in applications where board space is at a premium. The combination of small size, low capacitance and high level of ESD protection makes them a flexible solution for applications such as HDMI, MDDI, antenna circuits, Automatic Test Equipment, USB 2.0 and InfiniBand circuits.
• Designed to replace polymer TVS
• Protects up to two I/O lines
• <1pF Ultra-Low capacitance
• No insertion loss to >3.0GHz
• Low leakage current and clamping voltage
• Solid-state silicon-avalanche technology
• -55 to 125°C Operating temperature range
| Diode Configuration | Single |
| Direction Type | Uni-Directional |
| ESD Protection | Yes |
| Maximum Clamping Voltage | 25V |
| Maximum Operating Temperature | +125 °C |
| Maximum Peak Pulse Current | 6A |
| Maximum Reverse Leakage Current | 3µA |
| Maximum Reverse Stand-off Voltage | 5V |
| Minimum Breakdown Voltage | 6V |
| Minimum Operating Temperature | -55 °C |
| Mounting Type | Surface Mount |
| Number of Elements per Chip | 1 |
| Package Type | SLP EP |
| Peak Pulse Power Dissipation | 150W |
| Pin Count | 6 |
| Test Current | 1mA |
| Width | 1.6mm |
| Clamping Voltage Max | 18В |
| Reverse Standoff Voltage | 5В |
| Импульсная Рассеиваемая Мощность | 150Вт |
| Количество Выводов | 2вывод(-ов) |
| Линейка Продукции | Серия RailClamp |
| Максимальная Рабочая Температура | 125°C |
| Максимальное Напряжение Пробоя | 6В |
| Стиль Корпуса Диода | SLP1616P6 |
| Тип Монтажа Диода | SMD(Поверхностный Монтаж) |
| Automotive | No |
| Configuration | Quad |
| ECCN (US) | EAR99 |
| Maximum Clamping Voltage (V) | 25 |
| Maximum Leakage Current (uA) | 3 |
| Maximum Operating Temperature (°C) | 125 |
| Maximum Working Voltage (V) | 5 |
| Minimum Operating Temperature (°C) | -55 |
| Mounting | Surface Mount |
| Packaging | Tape and Reel |
| Part Status | NRND |
| PCB changed | 6 |
| Peak Pulse Power Dissipation (W) | 150 |
| PPAP | No |
| Supplier Package | SLP EP |
| Type | Diode Array |
| Вес, г | 0.039 |
Похожие товары
Цена по запросу
Цена по запросу
Цена по запросу
Цена по запросу
